Hach China
400-686-8899 / 800-840-6026
 

按产品分类

问题咨询 最后更新时间 产品分类
FT660SC 5 VOLT - Monitored voltage is outside the range 4.5–5.5 V 2018-11-09 FilterTrak 660 sc 超低量程浊度仪
FT660SC Method of Operation 2018-11-09 FilterTrak 660 sc 超低量程浊度仪
FT660SC Head Assembly 60161-00 2018-11-09 FilterTrak 660 sc 超低量程浊度仪
FT660SC Low (< 1) or negative readings - Instrument head not properly seated on the body. 2018-11-09 FilterTrak 660 sc 超低量程浊度仪
FT660SC REFERENCE VOLTAGE 2018-11-09 FilterTrak 660 sc 超低量程浊度仪
FT660SC PMT VOLTAGE PMT 2018-11-09 FilterTrak 660 sc 超低量程浊度仪
FT660SC OUTPUT MODE NOT NORMAL - Sensor is being calibrated. 2018-11-09 FilterTrak 660 sc 超低量程浊度仪
FT660SC DATA LOG FULL/ EVENT LOG FULL - Only 30 minutes worth of space remains in the Data Log. 2018-11-09 FilterTrak 660 sc 超低量程浊度仪
FT660SC LASER I 2018-11-09 FilterTrak 660 sc 超低量程浊度仪
FT660SC LASER V - Laser voltage is out of the operating range of 4.5 and 5.5 V 2018-11-09 FilterTrak 660 sc 超低量程浊度仪
FT660SC VOLTAGE IN - Monitored voltage is outside the range of 9.08–14.3 V 2018-11-09 FilterTrak 660 sc 超低量程浊度仪
FT660SC的技术参数 2018-11-09 FilterTrak 660 sc 超低量程浊度仪
FT660SC TEMPERATURE - Sensor head internal temperature is higher than 50 °C. 2018-11-09 FilterTrak 660 sc 超低量程浊度仪
FT660SC DARK READING - Dark reading detects too much light (more than 50 mNTU) 2018-11-09 FilterTrak 660 sc 超低量程浊度仪
FT660SC LOW SIGNAL ERROR - Signal is too low (measuring less than 3.0 mNTU) 2018-11-09 FilterTrak 660 sc 超低量程浊度仪
FT660SC FLASH FAILURE - Datalog and event log will not work. 2018-11-09 FilterTrak 660 sc 超低量程浊度仪
FT660SC LASER FAILURE - Laser failed to operate properly and is turned off. 2018-11-09 FilterTrak 660 sc 超低量程浊度仪
FT660SC A/D FAILURE - A/D conversion failed 2018-11-09 FilterTrak 660 sc 超低量程浊度仪
FT660SC Verification 2018-11-09 FilterTrak 660 sc 超低量程浊度仪
FT660SC Calibration 2018-11-09 FilterTrak 660 sc 超低量程浊度仪

 

您的浏览器版本过低,存在重大安全隐患,请升级到IE10以上,或使用最新版ChromeFirefox浏览,谢谢